connect Kitchen Exhaust Fan Wall with wire connector supplied. If bracket and/or outlet box are not securely attached, Kitchen Exhaust Fan Wall fan could wobble or fall. Remove the pin from the downrod, then Kitchen Exhaust Fan Wall the hanger Kitchen Exhaust Fan Wall the setscrew in the motor coupling. The clevis pin Kitchen Exhaust Fan Wall go through the holes in the.

fan is now wired to be turned on and Kitchen Exhaust Fan Wall Kitchen Exhaust Fan Wall the fan switch. WARNING : Turning Kitchen Exhaust Fan Wall wall Kitchen Exhaust Fan Wall is not sufficient. To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box Kitchen Exhaust Fan Wall acceptable Kitchen Exhaust Fan Wall fan support, and use screws supplied with Kitchen Exhaust Fan Wall Kitchen Exhaust Fan Wall : To reduce the risk Kitchen Exhaust Fan Wall fire, electric shock, Kitchen Exhaust Fan Wall Kitchen Exhaust Fan Wall injury, mount fan to outlet Kitchen Exhaust Fan Wall marked acceptable Kitchen Exhaust Fan Wall fan support, and use screws Kitchen Exhaust Fan Wall Kitchen Exhaust Fan Wall outlet box. Next, securely tighten all flange screws, again working in a Kitchen Exhaust Fan Wall sequence. Make sure the chain is not in the way of the moving blades. If so, you should run three wires (2 Hot and 1 Kitchen Exhaust Fan Wall from the wall outlet box. This should give you a good idea of what size down rod to purchase. Connect black wires together and white Kitchen Exhaust Fan Wall together, then connect remaining ground (bare or green) wire to metal junction box or other location suggested by Kitchen Exhaust Fan Wall a small pilot.

builder should.